Sonifex GPIO to LAN Transceiver (EMBER+ & UDP)

GPIO to LAN Transceiver (EMBER+ & UDP)

The AVN-GPIO converts GPIO (General Purpose Inputs & Outputs) to network commands (using EMBER+ and UDP) to control, and be controlled by, other equipment or software across a standard network. It has 10 configurable GPIO’s, 8 of which can be used for PTP timing based programming, together with a voltage free relay contact, allowing any legacy equipment with hardware GPIO to be controlled over a network. For example, button presses can be converted to network commands, to act as inputs to PC software for event handling.

It uses IEEE1588-2008 PTPv2 to keep its hardware clock in sync with a PTP master, such as the Sonifex AVN-GMCS Grandmaster Clock, to achieve a sub 10ns synchronisation to the master reference. So the AVN-GPIO can be used to accurately timestamp input events and to trigger outputs at configured times. In a motor racing application, PTP enabled time inputs can be used to accurately record the time when cars pass the finish line with a nanosecond resolution.

For more information on the Sonifex GPIO to LAN Transceiver (EMBER+ & UDP), click here!

The Company agrees to repair or (at its discretion) replace Goods which are found to be defective (fair wear and tear excepted) and which are returned to the Company within the Warranty Term provided that each of the following are satisfied:

1. (i) notification of any defect is given to the Company immediately upon its becoming apparent to the Purchaser;
2. (ii) the Goods have only been operated under normal operating conditions and have only been subject to normal use (and in particular the Goods must have been correctly connected and must not have been subject to high voltage or to ionising radiation and must not have been used contrary to the Company's technical recommendations);
3. (iii) the Goods are returned to the Company's premises at the Purchaser's expense;
4. (iv) any Goods or parts of Goods replaced shall become the property of the Company;
5. (v) no work whatsoever (other than normal and proper maintenance) has been carried out to the Goods or any part of the Goods without the Company's prior written consent;
6. (vi) the defect has not arisen from a design made, furnished or specified by the Purchaser;
7. (vii) the Goods have been assembled or incorporated into other goods only in accordance with any instructions issued by the Company;
8. (viii) the defect has not arisen from a design modified by the Purchaser;
9. (ix) the defect has not arisen from an item manufactured by a person other than the Company. In respect of any item manufactured by a person other than the Company, the Purchaser shall only be entitled to the benefit of any warranty or guarantee provided by such manufacturer to the Company.