Sonifex S2 6 Way Stereo Source Select Channel (with EQ)

S2 6 Way Stereo Source Select Channel (with EQ)

The 6 way stereo line source select channel has 6 balanced stereo inputs on a 25 way D-type connector selectable by a 6 way mechanical interlocking switch bank, numbered 1 - 6. A depressed button indicates the selected input. The switch bank also controls 6 sets of remote outputs allowing each source to have a set of start/stop remotes. The remote starts can be set as momentary or latching.

Continuous momentary start can also be enabled such that when the fader is up and the channel is on, each press of the ON button triggers a momentary start. The channel is fitted with EQ as standard and other functions are similar to the S2-CSE Dual Stereo channel with EQ.

The HF and LF controls are used to adjust the equalisation of the signal. The HF control boosts and cuts the signal by 10dB at 6.5kHz. The LF control boosts and cuts the signal by 10dB at 100Hz. The EQ button places the equalisation in and out of the signal path and is illuminated yellow when the EQ is active. The channel can be used to control either one of two separate timer displays.

For more information on the Sonifex S2 6 Way Stereo Source Select Channel (with EQ), click here!

The Company agrees to repair or (at its discretion) replace Goods which are found to be defective (fair wear and tear excepted) and which are returned to the Company within the Warranty Term provided that each of the following are satisfied:

1. (i) notification of any defect is given to the Company immediately upon its becoming apparent to the Purchaser;
2. (ii) the Goods have only been operated under normal operating conditions and have only been subject to normal use (and in particular the Goods must have been correctly connected and must not have been subject to high voltage or to ionising radiation and must not have been used contrary to the Company's technical recommendations);
3. (iii) the Goods are returned to the Company's premises at the Purchaser's expense;
4. (iv) any Goods or parts of Goods replaced shall become the property of the Company;
5. (v) no work whatsoever (other than normal and proper maintenance) has been carried out to the Goods or any part of the Goods without the Company's prior written consent;
6. (vi) the defect has not arisen from a design made, furnished or specified by the Purchaser;
7. (vii) the Goods have been assembled or incorporated into other goods only in accordance with any instructions issued by the Company;
8. (viii) the defect has not arisen from a design modified by the Purchaser;
9. (ix) the defect has not arisen from an item manufactured by a person other than the Company. In respect of any item manufactured by a person other than the Company, the Purchaser shall only be entitled to the benefit of any warranty or guarantee provided by such manufacturer to the Company.