Sonifex AVN-HA1 Analogue Headphone Amp for AVN-PA8/D & AVN-PM8/D Portals

AVN-HA1 Analogue Headphone Amp for AVN-PA8/D & AVN-PM8/D Portals

AVN LogoThe AVN-PA8/D and the AVN-PM8/D Portals can be combined with multiple AVN-HA1 headphone amplifiers to provide a headphone distribution system – the portal output connections can supply analogue power to satellite headphone amplifiers and the unit can be mounted using the CM-MNT1 desk mount panel.

The AVN-PA8/D and AVN-PM8/D can be combined with multiple Sonifex AVN-HA1 headphone amplifiers to provide 8 separate headphone signals where each headphone amplifier can be sent a separate feed, mixed from any physical or stream inputs.

• Front panel 6.35mm (1/4”) headphone socket and volume control knob.
• Front panel Mute/GPO push button.
• Analogue audio input on RJ45 (the connector provides power to the unit and a GPO back to the portal).
• Loop through audio output on RJ45 (power and GPO signal are not connected).
• Locking DC power connector (if a portal is not being used to supply the unit with power).

Note: The AVN-HA1 is an analogue input product taking an analogue audio feed from the AVN portals. It can be used independently of the portals by using the separate DC input for power and a separate analogue input.

Features

• Front panel 6.35mm (1/4”) headphone socket and volume control knob, with mute/GPO push button.
• Locking DC power connector if a portal is not being used to supply the unit with power.
• Analogue audio input on RJ45 (the connector provides power to the unit and a GPO back to the portal).
• Loop through audio output on RJ45 (power and GPO signal are not connected)

For more information on the Sonifex AVN-HA1 Analogue Headphone Amp for AVN-PA8/D & AVN-PM8/D Portals, click here!

The Company agrees to repair or (at its discretion) replace Goods which are found to be defective (fair wear and tear excepted) and which are returned to the Company within the Warranty Term provided that each of the following are satisfied:

1. (i) notification of any defect is given to the Company immediately upon its becoming apparent to the Purchaser;
2. (ii) the Goods have only been operated under normal operating conditions and have only been subject to normal use (and in particular the Goods must have been correctly connected and must not have been subject to high voltage or to ionising radiation and must not have been used contrary to the Company's technical recommendations);
3. (iii) the Goods are returned to the Company's premises at the Purchaser's expense;
4. (iv) any Goods or parts of Goods replaced shall become the property of the Company;
5. (v) no work whatsoever (other than normal and proper maintenance) has been carried out to the Goods or any part of the Goods without the Company's prior written consent;
6. (vi) the defect has not arisen from a design made, furnished or specified by the Purchaser;
7. (vii) the Goods have been assembled or incorporated into other goods only in accordance with any instructions issued by the Company;
8. (viii) the defect has not arisen from a design modified by the Purchaser;
9. (ix) the defect has not arisen from an item manufactured by a person other than the Company. In respect of any item manufactured by a person other than the Company, the Purchaser shall only be entitled to the benefit of any warranty or guarantee provided by such manufacturer to the Company.