null

Sonifex RB-VHEMA8 3G/HD/SD-SDI Embedder

Sonifex

Write a Review
Price: $4,278.95
SKU:
SON-RB-VHEMA8
Condition:
New
Availability:
Item not stocked locally. Can usally ship in from the UK within 2-3 weeks.
Shipping:
Calculated at Checkout
More Info:
8 Channel Analogue Inputs
Product Link:
https://www.sonifex.co.uk/redbox/rbvhema8_ld.shtml
Manufacturers Part Number:
RB-VHEMA8
Sonifex RB-VHEMA8 3G/HD/SD-SDI Embedder - Image 1
Adding to cart… The item has been added

Product Overview

RB-VHEMA8 3G/HD/SD-SDI Embedder - (8 Channel Analogue Inputs)

The RB-VHEMA8 is an 8 channel analogue embedder contained in a single 19-inch rack unit. The unit can selectively embed up to 8 analogue channels onto either of the two output video paths which are sent to the re-clocked SDI outputs. It also has the capability to allow audio groups to be deleted or passed through on each of the two video paths prior to the embedding process.

The embedding channel routing is controlled via the front panel buttons and indicators. There is also LED indication for SDI input status and audio group presence.

The unit can be remote controlled via Ethernet or serial port connections using the Sonifex SCi software.

It has a triple rate SDI receiver with automatic input rate detection and equalisation along with two re-clocked and individually buffered SDI outputs. It supports the full range of single link 3G, SD and HD standards from NTSC and PAL up to 1080p 60Hz.

There is independent level control for each analogue input channel, which can be adjusted from -24dB through to +24dB in 0.5dB steps. The analogue inputs have three full-scale gain settings which can be set via jumpers situated inside the unit. Allowable settings are +12dBu, +18dBu and +24dBu for FSD. The balanced and unbalanced input connections are paralleled, allowing one type to be used per input.

For more information on the Sonifex RB-VHEMA8 3G/HD/SD-SDI Embedder, click here!

Warranty Information

The Company agrees to repair or (at its discretion) replace Goods which are found to be defective (fair wear and tear excepted) and which are returned to the Company within the Warranty Term provided that each of the following are satisfied:
  1. (i) notification of any defect is given to the Company immediately upon its becoming apparent to the Purchaser;
  2. (ii) the Goods have only been operated under normal operating conditions and have only been subject to normal use (and in particular the Goods must have been correctly connected and must not have been subject to high voltage or to ionising radiation and must not have been used contrary to the Company's technical recommendations);
  3. (iii) the Goods are returned to the Company's premises at the Purchaser's expense;
  4. (iv) any Goods or parts of Goods replaced shall become the property of the Company;
  5. (v) no work whatsoever (other than normal and proper maintenance) has been carried out to the Goods or any part of the Goods without the Company's prior written consent;
  6. (vi) the defect has not arisen from a design made, furnished or specified by the Purchaser;
  7. (vii) the Goods have been assembled or incorporated into other goods only in accordance with any instructions issued by the Company;
  8. (viii) the defect has not arisen from a design modified by the Purchaser;
  9. (ix) the defect has not arisen from an item manufactured by a person other than the Company. In respect of any item manufactured by a person other than the Company, the Purchaser shall only be entitled to the benefit of any warranty or guarantee provided by such manufacturer to the Company.