null

Sonifex AVN-DIO12 Dual Mono Microphone Input to Dante

Sonifex

Write a Review
Price: $1,237.45
SKU:
SON-AVN-DIO12
Condition:
New
Availability:
Item not stocked locally. Can usally ship in from the UK within 2-3 weeks.
Shipping:
Calculated at Checkout
More Info:
With Mic Gain
Product Link:
https://www.sonifex.co.uk/avn/avn-dio12.shtml
Manufacturers Part Number:
AVN-DIO12
Adding to cart… The item has been added

Product Overview

AVN-DIO12 Dual Mono Microphone Input to Dante - (With Mic Gain)

The AVN-DIO12 is a dual microphone input to Dante® converter with adjustable mic gain in the Sonifex DIO range of Dante® input/output devices. It’s effectively 2 x AVN-DIO09 units in a single chassis, still offering A/D circuitry with a world-class E.I.N. of 129dB.

It features 2 balanced analogue XLR inputs and one Neutrik etherCON connector for direct connection to a Dante® AoIP network. Each mic has coarse and fine gain controls, high pass filter, phantom power & tri-color level LED and can be routed via Dante Controller to any Dante receiver.

It’s powered using Power over Ethernet (PoE), using a Neutrik etherCON connector for power and data redundancy. The AVN-DIO12 uses the latest Audinate Dante chipset so is AES67 and Dante Domain Manager compliant.

Gain Adjustment

The AVN-DIO012 has coarse and fine mic gain for each microphone input. The coarse gain is set using the toggle switch, which provides 20dB/50dB of gain. The fine gain can be set using a trimmer adjustment tool, or small flat blade screwdriver, and adds between 0dB and 36dB of additional gain.

High Pass Filter

Each microphone input has an on/off toggle switch which turns the high pass filter on or off. When enabled, it acts on frequencies below 125Hz at a roll-off of 6dB/octave.

Phantom Power

Phantom power is enabled/disabled via a toggle switch on the front panel for each microphone input. When enabled, a 48V DC supply is provided to power an appropriate microphone. The red LED next to each input will illuminate to indicate phantom power is enabled.

Audio Level LED

To help you set the mic gain, a level LED is provided on the front panel for each microphone input to display the audio level being sent to the Dante network.The indicator thresholds are as follows:
  • Off: Level is under -38dBFS (-20dBu)
  • Green: Level is between -38dBFS (-20dBu) and -18dBFS (0dBu)
  • Amber: Level is between -18dBFS (0dBu) and -10dBFS (+8dBu)
  • Red: Level is above -10dBFS (+8dBu)

Features

  • 2 x balanced microphone input on XLR sockets with latch locks
  • Neutrik EtherCon® Ethernet connection
  • Single turn pots setting fine mic gain (0dB – 36dB)
  • Coarse mic gain switches (+20db/+50dB)
  • High pass filter on/off switches
  • Ultra-high quality, wide dynamic range A/D conversion
  • Phantom power on/off switches
  • Phantom power LED indicators
  • Level LED indicators
  • Fully Dante compliant device
  • AES67 compatible
  • Dante Domain Manager compliant
  • Powered via PoE (Power over Ethernet)
  • Clock, PoE and Sync LEDs
  • 3 x units rackmount in the AVN-DIORK

For more information on the Sonifex AVN-DIO12 Dual Mono Microphone Input to Dante, click here!

Warranty Information

The Company agrees to repair or (at its discretion) replace Goods which are found to be defective (fair wear and tear excepted) and which are returned to the Company within the Warranty Term provided that each of the following are satisfied:
  1. (i) notification of any defect is given to the Company immediately upon its becoming apparent to the Purchaser;
  2. (ii) the Goods have only been operated under normal operating conditions and have only been subject to normal use (and in particular the Goods must have been correctly connected and must not have been subject to high voltage or to ionising radiation and must not have been used contrary to the Company's technical recommendations);
  3. (iii) the Goods are returned to the Company's premises at the Purchaser's expense;
  4. (iv) any Goods or parts of Goods replaced shall become the property of the Company;
  5. (v) no work whatsoever (other than normal and proper maintenance) has been carried out to the Goods or any part of the Goods without the Company's prior written consent;
  6. (vi) the defect has not arisen from a design made, furnished or specified by the Purchaser;
  7. (vii) the Goods have been assembled or incorporated into other goods only in accordance with any instructions issued by the Company;
  8. (viii) the defect has not arisen from a design modified by the Purchaser;
  9. (ix) the defect has not arisen from an item manufactured by a person other than the Company. In respect of any item manufactured by a person other than the Company, the Purchaser shall only be entitled to the benefit of any warranty or guarantee provided by such manufacturer to the Company.