null

Sonifex S2 Studio Monitor Channel

Sonifex

Write a Review
Price: $764.45
SKU:
SON-S2-OMS
Condition:
New
Availability:
Item not stocked locally. Can usally ship in from the UK within 2-3 weeks.
Shipping:
Calculated at Checkout
More Info:
For more information or advice, please contact us at onair.au/contact-us
Product Link:
https://www.sonifex.co.uk/s2/s2-oms.shtml
Manufacturers Part Number:
S2-OMS
Sonifex S2 Studio Monitor Channel - Image 1
Adding to cart… The item has been added

Product Overview

S2 Studio Monitor Channel

The studio monitor channel is optional and is used for the monitoring of various sources on the studio loudspeakers (MONITOR) on a 6.35mm stereo jack socket and studio headphones (PHONES) on a 6.35mm stereo jack socket.

A front panel control is used to vary the monitor level. The studio monitor loudspeaker level can be variable between 0 (cut off) and 10 (max). The output will need to be fed to a suitable power amplifier to drive the loudspeakers. Headphones with impedances of 35 ohms and above can be driven directly from the channel headphone connector on the rear panel.

A four way electronically interlocking switch bank selects the source routed to the speakers and headphones from either of two external inputs (EXT 1, EXT 2), the PGM, or AUD output. The buttons illuminate to show the selected source, PGM and AUD in green, EXT 1 and EXT 2 in red. External inputs can be used for monitoring an off air signal or another studio output.

An illuminated Mute LED shows when a live microphone channel in the studio has muted the speakers. Mute outputs on the remote connector of the AUD output channel can be used to remotely illuminate “Mic Live” lights.

For more information on the Sonifex S2 Studio Monitor Channel, click here!

Warranty Information

The Company agrees to repair or (at its discretion) replace Goods which are found to be defective (fair wear and tear excepted) and which are returned to the Company within the Warranty Term provided that each of the following are satisfied:
  1. (i) notification of any defect is given to the Company immediately upon its becoming apparent to the Purchaser;
  2. (ii) the Goods have only been operated under normal operating conditions and have only been subject to normal use (and in particular the Goods must have been correctly connected and must not have been subject to high voltage or to ionising radiation and must not have been used contrary to the Company's technical recommendations);
  3. (iii) the Goods are returned to the Company's premises at the Purchaser's expense;
  4. (iv) any Goods or parts of Goods replaced shall become the property of the Company;
  5. (v) no work whatsoever (other than normal and proper maintenance) has been carried out to the Goods or any part of the Goods without the Company's prior written consent;
  6. (vi) the defect has not arisen from a design made, furnished or specified by the Purchaser;
  7. (vii) the Goods have been assembled or incorporated into other goods only in accordance with any instructions issued by the Company;
  8. (viii) the defect has not arisen from a design modified by the Purchaser;
  9. (ix) the defect has not arisen from an item manufactured by a person other than the Company. In respect of any item manufactured by a person other than the Company, the Purchaser shall only be entitled to the benefit of any warranty or guarantee provided by such manufacturer to the Company.