Product Overview
SR-28 Time Code Distributor / Reshaper - (With 2 inputs, 8 outputs and individual output level pots)
Cleans up timcode and distributes it to multiple destinations through 8 individually buffered outputs. Ideal for long cable runs. Either of the 2 inputs can be selected.
Like it’s big brother the SR-112 Distripalyzer, the SR-28 can drive timecode over long cables, making it ideal for synchronization during live shows and remote recording.
Features
- 2 x 8 time code distributor
- Designed to send TC over long cables
- Buffered outputs; balanced or unbalanced
- Individual output level adjust
- Low input threshold can help recover unreadable code
- Reshaper eliminates amplitude distortions and level fluctuations
- 2 power inputs for redundancy
The SR-28 time code distributor, with two inputs and eight outputs, reshapes time code while distributing it, eliminating amplitude distortions and level fluctuations. The level of each output is individually adjustable via front panel pots. The input is selected via a front panel switch. Also included are 2 power inputs and an automatic switch over in case of failure.
Buffered Outputs
Multing a single time code source to multiple destination can cause many problems. The SR-28 eliminates those by distributing timecode through balanced and buffered outputs.
Reshaping vs DA
The Brainstorm Timecode Distributors are more than audio DA’s: they reshape the signal before distributing it. Audio DA’s on the other hand, transfer all distortions and level fluctuations present at the source.
Low Input Threshold
The SR-28 recognizes time code at levels much lower than the threshold of many readers (better than -30db) while still safely above the noise floor. This feature makes it often possible to recover unreadable code by reshaping it, almost as if it was regenerating over drop outs.
Output Level Adjust
Output levels are adjustable individually via front panel pots from full off to +12db. These adjusted levels remain constant regardless of input level fluctuations.
Switchable Rise Times
The output rise time (slew limiting) is switchable between 25μs (SMPTE), 50μs (EBU) and 1μs (square wave, preferred by most readers).
For more information on the Brainstorm SR-28 Time Code Distributor / Reshaper, click here!