Product Overview
Compact PTZ Joystick Controller FULL DUPLEX RS-232/RS-422 - (with VISCA & PELCO protocols for seamless tri-synchronis 4D control of Pan-Tilt-Zoom-Focus, menu control, and other one button control of CV620 cameras. Best for CV620.)
Specifically designed for CV620 & CV612 PTZ Cameras (Visca and Pelco)
- 4D Joystick allows simultaneous control over Pan, Tilt, Zoom and Focus
- 128 Preset locations with smooth adjustable transition speeds
- One touch controls over Brightness, Back Light, Mirror/Flip, Freeze Capture
- Full Duplex RS-232 & RS-422 Communication Interface
- VISCA and PELCO Protocols
- Bright OLED Display with Auto Backlight Keys
- Can operate 1~255 cameras (CV620)
- Multi-level protection from unauthorized operation
- Compact Design - Dims 7.87"(L) x 4.72"(W) x 4.06")
- 12V DC (less then 2W)
- 0.5kg (1.1lb)
The VS-PTC-200 Compact PTZ Controller is designed and built to integrate seamlessly with Marshall CV620 Broadcast PTZ Cameras. This PTZ controller will operate Pan, Tilt, Zoom, and Focus simultaneously with the joystick as well as adjustment control over Brightness, Preset/Recall locations, Flip and Mirror, Backlight Compensation, Freeze Frame, Manual Focus and other adjustments on the keypad buttons.
For more information on the Marshall Compact PTZ Joystick Controller FULL DUPLEX RS-232/RS-422, click here!
Warranty Information
All non-camera products are covered under a one (1) Year Standard Warranty (CV605, CV612TBI , CV612TWI, cameras have a one year warranty).
Two (2) Year Standard Warranty applies on the following models:CV500-series, CV228, CV343~CV374, CV355-27X-IP, CV355-27X-ND3, CV355-30X-IP, CV355-30X-NDI, CV355-10X, CV356, CV380, CV420-27X, CV420e, VS-PTC-200, VS-PTC-300, VS-PTCIP and all other camera equipment
Three (3) Year Warranty applies for all active CV620, CV625, CV630, CV730 models.
This warranty is extended to the first consumer only, and proof-of-purchase and/or serial number are required to honor the warranty. If there is no proof-of-purchase and/or serial number provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above. Therefore, labor and parts may be charged to the consumer. This warranty does not apply to the product exterior or cosmetics. Misuse, abnormal handling, alterations, damage or modifications in design or construction void this warranty. No sales personnel of the re-seller or any other person is authorized to make any warranties other than those described above, or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the period described above. Due to constant effort to improve products and product features, specifications may change without notice. All “B” stock, “DEMO” stock, EOL, Obsolete products will have limited 90 day warranty. Marshall Electronics is not covering any cost associated with removal of the product, reinstallation, and other associated damages.
To submit a RMA request, CLICK HERE
